SerialSCSI-00 (sasd) B.11.23.
© Copyright 2010 Hewlett-Packard Development Company, L.P. Legal Notices Hewlett-Packard makes no warranty of any kind with regard to this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be held liable for errors contained herein or direct, indirect, special, incidental or consequential damages in connection with the furnishing, performance, or use of this material. Confidential computer software.
This document provides information about the March 2010 release of the SerialSCSI-00 bundle for HP-UX 11i v2. 1 SerialSCSI-00 (sasd) Overview The SerialSCSI-00 bundle contains the sasd driver for the AH303A PCIe SC44Ge SAS Host Bus Adapter, and the core-only HP 8 Internal Port SAS Controller and HP Multi Port Internal SAS Controller. The sasd driver is always installed. 1.
Problems Fixed in Recent Versions Table 3 HP-UX 11i v2 September 2009 Fixes — SerialSCSI-00 B.11.23.0909 SR Number QXCR1000940381 Description System panic when the data cable is disconnected from an HP StorageWorks MSA60 or MSA70 enclosure. Table 4 HP-UX 11i v2 March 2009 Fixes — SerialSCSI-00 B.11.23.0903 SR Number QXCR1000813841 Description System panic during boot. Table 5 HP-UX 11i v2 December 2008 Fixes — SerialSCSI-00 B.11.23.
Corrective Action: Before you shut down the server, run ioscan and note the DSF information for the failed disk. For more information on replacing disks, see the HP 8 Internal Port SAS Controller and HP Multi-Port Internal SAS Controller Support Guide at: http://docs.hp.com/en/netcom.html 4.2 AH303A PCIe SC44Ge SAS Host Bus Adapter • Virtual Partitions do not boot in multi-initiator configurations under vPars A.4.05. Virtual Partitions (vPars) version A.4.
4.3 All Controllers Supported by SerialSCSI-00 • System panic when downgrading the sasd driver. CAUTION: Installing version B.11.23.0712 or earlier of the sasd driver downgrades the adapter firmware. This can cause RAID volumes in the system to become degraded. Back up important data before downgrading the adapter firmware. If you install an older version of the sasd driver and version B.11.23.
5.3 Hardware Requirements This version of SerialSCSI-00 runs on HP Integrity servers with the HP-UX 11i v1 (B.11.23) operating system. For more information on supported systems, see the SAS Host Bus Adapters Support Matrix at: http://docs.hp.com/en/netcom.html 6 Related Information The latest documentation for CommonIO and SAS host bus adapters is available in English at: http://docs.hp.com/en/netcom.
