SerialSCSI-00 (sasd) B.11.31.1009 Mass Storage Driver Release Notes

This document provides information about the September 2010 release of the SerialSCSI-00
bundle for HP-UX 11i v3.
1 SerialSCSI-00 (sasd) Overview
The SerialSCSI-00 bundle contains the sasd driver for the AH303A PCIe SC44Ge SAS Host Bus
Adapter, and the core-only HP 8 Internal Port SAS Controller and HP Multi Port Internal SAS
Controller. The sasd driver is always installed.
2 New and Changed Features in This Release
2.1 New Features
There are no new features included in SerialSCSI-00 at the time of this publication.
2.2 Changed Features
There are no changed features included in SerialSCSI-00 at the time of this publication.
3 Problems Fixed in This Version
Table 1 HP-UX 11i v3 September 2010 Fixes — SerialSCSI-00 B.11.31.1009
DescriptionSR Number
Diagnostic buffer offset value is incorrect.QXCR1000988001
Problems Fixed in Recent Versions
Table 2 HP-UX 11i v3 march 2010 Fixes — SerialSCSI-00 B.11.31.1003
DescriptionSR Number
Under certain conditions, following a Transfer of Control (TOC) on the SAS disk, the dump
is successful but the subsequent reboot causes a “NEED DRIVERS” panic and the system
does not boot.
QXCR1000972451
Table 3 HP-UX 11i v3 September 2009 Fixes — SerialSCSI-00 B.11.31.0909
DescriptionSR Number
Double system panic and shutdown daemon detects a hang condition.QXCR1000890780
The olrad -d command hangs on adapters supported by the sasd driver.
QXCR1000901313
System panic when the data cable is disconnected from an HP StorageWorks MSA60 or
MSA70 enclosure.
QXCR1000911615
Table 4 HP-UX 11i v3 March 2009 Fixes — SerialSCSI-00 B.11.31.0903
DescriptionSR Number
Potential system hang issue during abort for an I/O.QXCR1000865554
System panics while posting an ABORT request when chip is in transient state.QXCR1000837729
Table 5 HP-UX 11i v3 December 2008 Fixes — SerialSCSI-00 B.11.31.0812
DescriptionSR Number
Unmapped WSIO Memory causes MCA.QXCR1000878007
1 SerialSCSI-00 (sasd) Overview 3