HP AT134A/SC11Xe Host Bus Adapter Installation Guide Abstract This document contains specific information that is intended for users of this HP product.
© Copyright 2012 Hewlett-Packard Development Company L.P Legal Notices The information in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
Contents 1 Features....................................................................................................4 Connectors on the adapter board...............................................................................................4 Summary of specifications.........................................................................................................4 2 Installation procedure..................................................................................5 Installation overview.
1 Features Connectors on the adapter board Item Description 1 External VHDCI connector 2 Internal 68-pin Wide SCSI connector Do not operate the adapter with devices connected to both connectors. Doing so causes the adapter to malfunction and might prevent the server from booting.
2 Installation procedure Installation overview WARNING! To reduce the risk of personal injury or damage to the equipment, consult the safety information and user documentation provided with the server before attempting the installation. WARNING! Many servers are capable of providing energy levels that are considered hazardous and are intended to be serviced only by qualified personnel who have been trained to deal with these hazards.
2. 3. 4. 5. 6. Locate the PCIe bus expansion slots, and select the slot that you want to use. (For more information, see the server documentation.) Depending on the server model, remove the retaining screw or open the expansion slot latch that secures the PCIe slot. Remove the slot cover and save it. You will need to put it back if you decide to remove the adapter and leave the slot empty. Insert the adapter into the slot, and press it firmly into place.
Description Part number 1.8-m (6-ft) VHDCI-to-Wide SCSI external 341176-B21 3.7-m (12-ft) VHDCI-to-Wide SCSI external 341177-B21 You can order extra cables from an authorized HP reseller or authorized HP service provider. For ordering information and locations of the authorized HP resellers, see the HP website: http://www.hp.com Connecting the adapter to external storage 1. 2. 3. 4. Plug the appropriate end of the cable into the correct connector on the external storage system.
3 Electrostatic discharge Preventing electrostatic discharge To prevent damaging the system, be aware of the precautions you need to follow when setting up the system or handling parts. A discharge of static electricity from a finger or other conductor may damage system boards or other static-sensitive devices. This type of damage may reduce the life expectancy of the device. To prevent electrostatic damage: • Avoid hand contact by transporting and storing products in static-safe containers.
4 Regulatory compliance notices Federal Communications Commission notice Part 15 of the Federal Communications Commission (FCC) Rules and Regulations has established Radio Frequency (RF) emission limits to provide an interference-free radio frequency spectrum. Many electronic devices, including computers, generate RF energy incidental to their intended function and are, therefore, covered by these rules.
For questions regarding this product, contact us by mail or telephone: • Hewlett-Packard Company P. O. Box 692000, Mail Stop 530113 Houston, Texas 77269-2000 • 1-800-HP-INVENT (1-800-474-6836). (For continuous quality improvement, calls may be recorded or monitored.) For questions regarding this FCC declaration, contact us by mail or telephone: • Hewlett-Packard Company P. O.
The compliance is indicated by one of the following conformity markings placed on the product: For non-telecommunications products and for EU harmonized telecommunications products, such as Bluetooth® within power class below 10mW. For EU non-harmonized telecommunications products (If applicable, a 4-digit notified body number is inserted between CE and !). Please refer to the regulatory label provided on the product. The point of contact for regulatory matters is Hewlett-Packard GmbH, Dept.
Regulatory compliance notices
