HP SC40Ge Host Bus Adapter Reference Guide

Configuration and operation 10
Adapter List screen
The Adapter List screen is the first screen to appear when the SAS BIOS configuration utility opens. This
screen provides information about each adapter installed in the system.
If the host bus adapter is configured as the active boot controller in RBSU, you can perform the following
actions:
• Change the position of an adapter in the boot-order sequence by moving the cursor to the Boot
Order field of the adapter, and then pressing the - or + key.
• Add an adapter to the Boot Order list by moving the cursor to the Boot Order field of the adapter,
and then pressing the Ins key.
• Remove an adapter from the Boot Order list by moving the cursor to the Boot Order field of the
adapter, and then pressing the Del key.
You are prompted to save the changes before exiting the screen.
The Adapter List screen is the gateway to the rest of the utility through the Adapter Properties screen (on
page 10). To access the Adapter Properties screen, select a listed adapter, and then press the Enter key.
Adapter Properties screen
The Adapter Properties screen provides information about the adapter, and gives access to other screens
that enable you to configure or manage a RAID volume or to view information about devices connected to
the adapter.
• To configure or manage a RAID volume, move the cursor to the RAID Properties field, and then press
the Enter key.