HP Scanjet 5370 scanner - (English) HP Precision Scan Pro for Macintosh version 1.4 Read Me

Note:

For most situations, HP recommends that you select the Easy Install installation package.

4. Click Install.

The Installer copies the HP ScanJet Plug-in to the appropriate locations on your computer.

5. If the installation is successful, click Restart to leave the Installer and restart the computer.

If an error occurs, click Reinstall and follow the instructions on the screen.

Installing the HP ScanJet Plug-in for other applications

To install the HP ScanJet Plug-in for other applications on your computer, complete the

following steps:

1. Quit the application with which you want to use the plug-in.

2. Insert the HP Scanning Software CD into your computer's CD-ROM drive. The HP Scannin

Software window appears. (If the HP Scanning Software window does not appear, double-click

the icon for the HP Scanning Software CD.)

3. In the HP Scanning Software window, double-click the "HP ScanJet Plug-in" folder.

4. Drag the HP ScanJet Plug-in (which is named HPScanJet) to the appropriate location for the

application with which you want to use the plug-in. (Many applications have a specific folder for

plug-ins. For information about where to place the plug-in, see the documentation provided with

the application.)

5. Start the application with which you want to use the plug-in.

For more information about using the HP ScanJet Plug-in, see the HP PrecisionScan Pro Help

or the documentation provided with the specific application.

D. Troubleshooting installation problems

If you installed the HP ScanJet scanner and the HP PrecisionScan Pro software but you are

unable to scan, complete the following steps:

1. Make sure the scanner is receiving power. You can verify that the scanner is receiving power

by disconnecting the power cord from the scanner or from the electrical outlet and then

plugging in the power cord again.

After you plug in the power cord, lift the scanner document lid immediately to verify that the

lam

is on. If the scanner is receivin

ower, the scanner lam

should be on.

- 5 -