HP Scanjet N6350 Getting Started Guide

3 Product care and support
This section describes the options for product support.
Scanner LEDs
The scanner has two LEDs on the front panel that indicate scanner functions and error
conditions. The LED in the shape of an exclamation point (!) is the Attention LED, and
the LED in the Power button is the Power LED. The table below explains how to interpret
the indicator LEDs.
The Attention LED
quickly blinks amber.
The Power LED is
lit with a steady green
light.
Error condition. Check the scanner LCD for
an error message.
The Attention LED is lit
with a steady amber
light.
The Power LED is
lit with a steady green
light.
Fatal error condition. The scanner LCD
indicates that you should turn off the
scanner, then turn it on after 60 seconds.
The Power LED
slowly blinks green.
The scanner is warming up or scanning an
original.
The Power LED is
lit with a steady, dim
amber light.
The scanner is in Sleep mode.
The Power LED is
lit with a steady green
light.
The scanner is on and ready to scan.
Both LEDs are off. There is no power to the scanner.
Maintenance, troubleshooting, and support
Occasional cleaning of the scanner helps ensure higher-quality scans. The amount of
care necessary depends upon several factors, including the amount of use and the
environment. You should perform routine cleaning as necessary.
Routine cleaning and maintenance should include cleaning the automatic document
feeder (ADF), the scanner glass, and the transparent materials adapter (TMA).
Product care and support 19
English