Scanjet N8400 Setup and Support Guide

Programs Software use
They meet the minimum requirement for the scanner to work
properly.
Use the HP Document Copy software to send document scans
directly to a printer.
Use the HP Scanner Tools Utility to assign profiles to quick start
buttons, to choose which profiles are selectable from the
scanner front panel, and to view information about scanner
settings, status, and maintenance.
Kofax VirtualReScan Use to create clearer and more readable scans from colored or
damaged documents.
ScanSoft PaperPort CD
Programs Software use
ScanSoft PaperPort Use to organize, find, and share paper and PDF documents.
I.R.I.S. Readiris Pro CD
Programs Software use
I.R.I.S. Readiris Pro Use to scan typed documents with full-featured optical character
recognition (OCR) to create editable text that can be saved in a
variety of file formats.
Set up the hardware
Complete the following tasks in order to set up the scanner hardware and prepare it for
use.
Connect the automatic document feeder (ADF)
1. Hold the ADF in the open position (a 70 degree angle relative to the scanner bed).
Align the hinge posts on the ADF with the sockets on the scanner, and then gently
lower the ADF onto the scanner. The two hinge posts on the ADF fit in the sockets
on the scanner.
Chapter 1
(continued)
4 HP Scanjet N8400 series