HP scsiU320-00 (mpt) B.11.31.
© Copyright 2009 Hewlett-Packard Development Company, L.P. Legal Notices Hewlett-Packard makes no warranty of any kind with regard to this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be held liable for errors contained herein or direct, indirect, special, incidental or consequential damages in connection with the furnishing, performance, or use of this material. Confidential computer software.
This document provides information about the March 2009 release of the scsiU320-00 bundle for HP-UX 11i v3. 1 HP scsiU320-00 Overview The scsiU320-00 bundle contains the mpt driver, which supports the HP A7173A PCI-X Dual Channel Ultra320 SCSI Host Bus Adapter and the HP AB290A PCI-X 2-Port U320 SCSI and 2-Port Gigabit Ethernet Combination Card. Additionally, the mpt driver supports multiple servers using U320 SCSI Core I/O solutions. 1.
Known Problems and Limitations • Unnecessary reboot occurs when removing the mpt driver. If you use the swremove command to remove the dynamically loaded mpt driver, the Critical Resource Analysis (CRA) can fail. This causes swremove to incorrectly reboot the system. Severity: Low Corrective Action: To avoid this CRA failure, before running swremove install patch PHCO_36356 (or a superseding patch). Patches are available from the HP IT Resource Center at: http://itrc.hp.
