hp rp2400 Series of Servers Basic Cable Connections Version 2.0 Manufacturing Part Number: rp24xx_basic_cable-en January 2004 U.S.A. © Copyright 2002-2004 Hewlett-Packard Development Company, L.P..
Legal Notices Copyright Notices. © Copyright 2002-2004 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Printed in the U.S.A.
Contents 1. HP rp2400 Series of Servers Basic Cable Connections Record System Serial Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Front Panel Controls and indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Server External Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents 4
Figures Figure 1-1. Serial Number Locations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Figure 1-2. Controls and LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Figure 1-3. External Connections to the Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Figure 1-4. Console Connection and Configuration . . . . . . . . . . . . . . . . . . . . . . . .
Figures 6
1 HP rp2400 Series of Servers Basic Cable Connections To make the basic cable connections for the rp24xx Server, refer to the illustrations and instructions below. For detailed installation, maintenance, and technical information, refer to the rp24xx Hardware Manual and other documentation (search on rp2400) at http://docs.hp.com. Record System Serial Number Before proceeding further with this installation, locate and record the system serial number and store in a safe place.
HP rp2400 Series of Servers - Basic Cable Connections Front Panel Controls and indicators Front Panel Controls and indicators The following section describes the controls and LED indicators at the front of the rp24xx Server as shown in the following graphic: Figure 1-2 Controls and LED Indicators Run Attn. Fault Remote Power ccrr018 1. (Green) RUN LED - When lit, indicates that the system is powered-up. 2.
HP rp2400 Series of Servers - Basic Cable Connections Front Panel Controls and indicators The graphic shown below illustrates locations of the external connections to the server. Figure 1-3 External Connections to the Server 100-240V~, 600W 6.0-2.6A, 50-60Hz On/Off Switch win urbo GSP Reset Path: 0/2/0 win urbo Console/ UPS Port TOC wi n Path: 0/2/0 urbo 100-240V~, 600W 6.0-2.
HP rp2400 Series of Servers - Basic Cable Connections Connecting PDU(s) to Dedicated AC Input Receptacles NOTE • The Web Console has a default Internet Protocol (IP) address of 192.0.0.192 for rp2400 and rp2450 servers, and 127.0.0.1 for rp2430 and rp2470 servers. Make sure that no other device, including other rp24xx servers, has this address before connecting the server to your LAN. Using the LAN Console as a System Console.
HP rp2400 Series of Servers - Basic Cable Connections Console Connection and Configuration Console Connection and Configuration The following describes of the installation and configuration of the rp24xx server console.
HP rp2400 Series of Servers - Basic Cable Connections Console Connection and Configuration rp24xx Server RS-232 System Local Console Installation The following describes how to install a system console on an rp24xx Server. The HP-700 series terminal is used as an example. Other terminals may be used as a system console as long as they are configured for VT100 terminal emulation mode. 1.
HP rp2400 Series of Servers - Basic Cable Connections Console Connection and Configuration NOTE If you enter N when the Save all? (Y/N) prompt appears, the changes will take effect, but will be lost if the terminal is reset or powered off. HP700 VT-100 Mode Configuration The following procedure outlines the steps to configure the HP700 series terminal for VT-100 operation. NOTE You may use either the arrow keys or the tab key to move between the setting options on the screen.
HP rp2400 Series of Servers - Basic Cable Connections Console Connection and Configuration 14 Chapter 1
