Service Processor (GSP or MP) - User Guide, Second Edition

Table B-1 EFI Shell Command Reference
DescriptionCommand
Boot Commands — EFI Shell Commands related to nPartition booting
Set/view autoboot timeout variable
autoboot
Display/modify the driver/boot configuration
bcfg
Set/view BootTest bits
boottest
Boot over the LAN
lanboot
Reset the system (nPartition) for reconfiguration; the nPartition remains inactive in the
'shutdown for reconfig' state
reconfigreset
Reset the system (nPartition)
reset
Connect drivers for bootable devices
search
Configuration Commands — EFI Shell Commands for changing and retrieving system (nPartition) information
Set/view ACPI configuration mode
acpiconfig
Deconfigure/reconfigure cells (set cell use-on-next-boot values)
cellconfig
Deconfigure/reconfigure CPUs
cpuconfig
Display the current date or set the date of the system (nPartition)
date
Deconfigure/reconfigure memory (DIMMs)
dimmconfig
Display/change the error level
err
View/clear logs
errdump
View FRU data
fru
Display hardware information
info
Set/view a monarch processor
monarch
Make a PAL call
palproc
Enable/disable PCI expansion ROM drivers
romdrivers
Set/view preferred root cells (set nPartition core cell choices)
rootcell
Make a SAL call
salproc
Performs TFTP operation to a bootp/DHCP enabled Unix boot server
tftp
Display the current time or set the time of the system (nPartition). EFI time is set and
presented in GMT (Greenwich mean time)
time
Save/restore specific EFI variables
variable
Display the version information
ver
Device, Driver, and Handle Commands — EFI Shell Commands for managing devices, drivers, and handles
View serial port com settings
baud
Bind a driver to a device
connect
Hex dump of BlkIo devices
dblk
Display devices managed by EFI drivers
devices
Display tree of devices
devtree
Dump handle info
dh
Command Reference: EFI Shell Commands 31