HP Enterprise Cluster Master Toolkit User Guide (5900-2131, December 2011)

Table 21 Package Control Script Parameters
DescriptionControl script
Parameter Name [control script
parameters]
# VG created for this packagevgMySQLVG
# Logical vol created in VT/dev/vgMySQL/lvol1LV
# File system for DB/MySQL_1FS
# FS type is "Extended 2""ext2"FS_TYPE
# mount with read/write options"-o rw"FS_MOUNT_OPT
# Package Subnet"192.70.183.0"SUBNET
# Relocatable IP"192.70.183.171"IP
#The service name must be the same as defined in the package.
#configuration file.
SERVICE_NAME="mysql1_monitor"
SERVICE_CMD="/etc/cmcluster/pkg/MYSQL1/toolkit.sh monitor"
SERVICE_RESTART="-r 0"
In addition to the variables, modify the following functions in the package control script:
Table 22 Functions in Package Control Script
Change
Functions in Package Control
Script
Replace the "empty" line (": #do nothing...") with /etc/cmcluster/pkg/MySQL1/
toolkit.sh start.
customer_defined_run_cmds
Replace the "empty" line (": #do nothing...") with /etc/cmcluster/pkg/MySQL1/
toolkit.sh stop.
customer_defined_halt_cmds
Replace the "empty" line (": #do nothing...") with /etc/cmcluster/pkg/MySQL1/
toolkit.sh stop.
customer_defined_halt_cmds
Assuming the cluster has already been configured, edit the cluster configuration file to update the
"MAX_CONFIGURED_PACKAGES" (for example, increase MAX_CONFIGURED_PACKAGES by
the number of packages you are adding to the cluster). After editing the configuration file apply
the change via the cmapplyconf -C <cluster_config_file> command.
Distribute the cluster configuration file to all the nodes of the cluster using rcp (this is optional but
recommended).
The cluster has been updated so that you can add packages. To actually bring the cluster up, issue
the command cmruncl, then cmviewcl to see the cluster up and running.
For more information on cluster configuration, management, and maintenance, see Managing
ServiceGuard manual available at http://www.hp.com/go/hpux-serviceguard-docs —>HP
Serviceguard manual.
Creating Serviceguard package using Modular method.
Follow the steps below to create Serviceguard package using Modular method:
1. Create a directory for the package.
#mkdir /etc/cmcluster/pkg/mysql_pkg/
2. Copy the toolkit template and script files from mysql directory.
Creating Serviceguard package using Modular method. 93