Managing HP Serviceguard A.11.20.20 for Linux, March 2014

:
Nov 28 23:41:22 [e-mail]
master_control_script.sh[23516]:#########################################################################
Nov 28 23:41:22 [e-mail] master_control_script.sh[23516]: ###### Package reconfigure completed
with failures for pkg1 ######
Nov 28 23:41:22 [e-mail] master_control_script.sh[23516]: ###### Below is the summary of changes
for pkg1 ######
Nov 28 23:41:20 [e-mail] pr_util.sh[23621]: SUCCESS: Successfully activated PR on /dev/sdc
Nov 28 23:41:22 [e-mail] filesystem.sh[23808]: ERROR: Failed to fsck /dev/vg_dd0/lvol3.
Nov 28 23:41:22 [e-mail] filesystem.sh[23808]: ERROR: Will not attempt to apply remaining changes
due to the error encountered
Nov 28 23:41:22 [e-mail] filesystem.sh[23808]: WARNING: Not attempting to mount /dev/vg_dd0/lvol3
on /mnt1
Nov 28 23:41:22 [e-mail] master_control_script.sh[23516]:
#########################################################################
************************
syslog during this time:
************************
Nov 28 23:41:22 test1 cmserviced[18979]: Package Script for pkg1 failed with an exit(18).
Nov 28 23:41:22 test1 cmcld[18900]: Reconfigured package pkg1 on node test1.
Nov 28 23:41:22 test1 cmcld[18900]: Online reconfiguration of package pkg1 on node test1 failed. Check the
package log file for complete information.
Nov 28 23:41:22 test1 cmcld[18900]: Request from node test1 to disable global switching for package pkg1.
To rectify the failures, do one of the following:
1. Halt the package.
2. Make the required changes.
3. Restart the package
or
1. Verify and fix the problem using fsck command.
2. Verify the filesystem before mounting the device:
#e2fsck /dev/vg_dd0/lvol3
3. Mount the filesystem:
#mount /dev/vg_dd0/lvol3 /mnt1
4. Clear the online_modification_failed flag:
#cmmodpkg -f pkg1
5. Enable the global switching for the package:
#cmmodpkg -e pkg1
Table 15 describes how to fix the errors in the affected modules that are encountered during online
addition of a package.
Table 15 Modules affected during online addition
ExampleHow to rectify the failures or
apply those that are not
attempted
Modules affected during
online addition
Description
—You cannot rectify the failures in
XDC module manually and must
restart the package.
ext/xdc(xdc.sh)
Extending MD
(for
serviceguard-xdc
packages only)
To start the external pre script:
#script_name.sh start
If an external pre script which is
added to the package
configuration failed to start, run
the script manually with start
option.
script_name start
sg/external_pre_script
(external.sh)
Adding an
external pre
script to the
package
7.8 Reconfiguring a Package 249