Designing Disaster Recovery Clusters using Metroclusters and Continentalclusters, Reprinted October 2011 (5900-1881)

cjc1234/recovery recovery up
cjc1234/rehearsal rehearsal down
The following is an example of cmviewconcl output from a primary cluster that is down.
persian (root 2131): cmviewconcl -v
WARNING: Primary cluster cjc838 is in an alarm state
(cmrecovercl is enabled on recovery cluster cjc1234)
Primary cluster cjc838 is not configured to monitor recovery
cluster cjc1234
Continentalclusters cjccc1
RECOVERY CLUSTER cjc1234
PRIMARY CLUSTER STATUS EVENT LEVEL POLLING INTERVAL
cjc838 down ALARM 20
CONFIGURED EVENT STATUS DURATION LAST NOTIFICATION SENT
alert unreachable 15 sec --
alarm unreachable 30 sec --
alarm down 0 sec Fri May 12 12:13:06 PDT 2000
alert error 0 sec --
alert up 20 sec --
alert up 40 sec --
PACKAGE RECOVERY GROUP prg1
MAINTENANCE MODE NO
PACKAGE ROLE
STATUS cjc838/primary
primary down
cjc1234/recovery recovery up
cjc1234/rehearsal rehearsal down
The following is the output of a cmviewconcl command that displays data for a mutual recovery
configuration in which each cluster has both the primary and the recovery roles—the primary role
for one recovery group and the recovery role for the other recovery group:
Continentalclusters ccluster1
RECOVERY CLUSTER PTST_dts1
PRIMARY CLUSTER STATUS EVENT LEVEL POLLING INTERVAL
PTST_sanfran Unmonitored unmonitored 1 min
CONFIGURED EVENT STATUS DURATION LAST NOTIFICATION SENT
alert unreachable 1 min --
alert unreachable 2 min --
alarm unreachable 3 min --
alert down 1 min --
alert down 2 min --
alarm down 3 min --
alert error 0 sec --
alert up 1 min --
RECOVERY CLUSTER PTST_sanfran
PRIMARY CLUSTER STATUS EVENT LEVEL POLLING INTERVAL
PTST_dts1 Unmonitored unmonitored 1 min
CONFIGURED EVENT STATUS DURATION LAST NOTIFICATION SENT
alert unreachable 1 min --
alert unreachable 2 min --
alarm unreachable 3 min --
alert down 1 min --
alert down 2 min --
alarm down 3 min --
alert error 0 sec --
Maintaining Continentalclusters 109