Designing Disaster Recovery Clusters using Metroclusters and Continentalclusters, Reprinted October 2011 (5900-1881)

ManualsBrandsHP ManualsSoftwareHP Serviceguard Metrocluster with EMC SRDF

221

222

223

224

225

226

227

228

229

230

In the following sample listing there are eight device files that correspond to different paths to the

same vdisk. Use all the device files identified while creating a volume group which is described

in section, “Configuring Volume Groups using PVLinks”.

======================= mc-node1.cup.hp.com

=======================

Virtual Disk Name..: \\XL-1\Vdisk001-DRGSynDCN

Disk...............: /dev/dsk/c16t0d1

Disk...............: /dev/dsk/c17t0d1

Disk...............: /dev/dsk/c18t0d1

Disk...............: /dev/dsk/c20t0d1

Disk...............: /dev/dsk/c12t0d1

Disk...............: /dev/dsk/c13t0d1

Disk...............: /dev/dsk/c14t0d1

Disk...............: /dev/dsk/c15t0d1

World Wide Lun ID..: 6005-08b4-0010-203d-0000-6000-0017-0000

Virtual Disk Name..: \\XL-1\Vdisk002-DRGSynDCS

Disk...............: /dev/dsk/c16t0d5

Disk...............: /dev/dsk/c17t0d5

Disk...............: /dev/dsk/c18t0d5

Disk...............: /dev/dsk/c20t0d5

Disk...............: /dev/dsk/c12t0d5

Disk...............: /dev/dsk/c13t0d5

Disk...............: /dev/dsk/c14t0d5

Disk...............: /dev/dsk/c15t0d5

World Wide Lun ID..: 6005-08b4-0010-299b-0000-a000-002f-0000

For more information on configuring and installing RSM and RSM_HV_Mapper tool, contact your

HP representative.

For EVAInfo Tool

# evainfo -w wwn

This command displays device file information for vdisk with the specified vdisk WWN. Use HP

StorageWorks Command View EVA to determine the WWN of the vdisks. The tool also displays

information on the connected port, the controller on EVA and if the device path is active and

optimized for I/O for that LUN.

The following sample displays eight device files that correspond to different paths to the same

vdisk. Use all the device files identified while creating a volume group which is described in section,

"Configuring Volume Groups using PVLinks".

Devicefile Array WWNNCapacity Controller/Port/Mode

/dev/rdsk/c12t1d6 5000-1FE1-5007-DBD0