Designing Disaster Recovery Clusters using Metroclusters and Continentalclusters, Reprinted October 2011 (5900-1881)

resource_name /dts/mcsc/cw_sc
resource_polling_interval 120
resource_up_value != DOWN
resource_start automatic
If you have VERITAS CVM configured in your environment, add the EMS resource details in
the CVM disk group packages on both the sites.
resource_name /dts/mcsc/cw_sc
resource_polling_interval 40
resource_up_value != DOWN
resource_start automatic
If you have SG SMS CVM or CFS configured as a modular package in your environment,
add the EMS resource details in the CVM disk group packages on both the sites.
resource_name /dts/mcsc/cw_sc
resource_polling_interval 40
resource_up_value != DOWN
resource_start automatic
When using SLVM, or VERITAS CVM, or SG SMS CVM/CFS configured as a modular package,
run the cmapplyconf command to apply the modified package configuration.
2. Verify the Site Safety Latch resource configuration at both sites.
If you have SMS CVM or CFS configured as a legacy package in your environment, run the
following command:
cfsdgadm show_ems <dg_name>
RESOURCE_NAME /dts/mcsc/cw_sc
RESOURCE_POLLING_INTERVAL 40
RESOURCE_UP_VALUE != DOWN
If you have SLVM configured in your environment, run the following command to view the
EMS resource details:
cmviewcl -v –p <pkg_name>
If you have VERITAS CVM configured in your environment, run the following command to
view the EMS resource details:
cmviewcl -v –p <CVM_diskgroup_pkg_name>
3. If you have SG SMS CFS/CVM configured in your environment as modular style package,
run the following command to view the EMS resource details:
cmviewcl -v -p <SG_SMS_CVM_diskgroup_package_name>
4. Configure the Site Controller Package with complex-workload packages of both sites.
The following example depicts configuring the Site Controller Package with complex workload
packages using CFS:
site san_francisco
critical_package sfo_cw
managed_package sfo_cw_dg
managed_package sfo_cw_mp
site san_jose
critical_package sjc_cw
managed_package sjc_cw_dg
managed_package sjc_cw_mp
358 Designing a Disaster Recovery Solution Using Site Aware Disaster Tolerant Architecture