Advanced Data Guarding User Guide

Installation 2-3
Compaq Confidential – Need to Know Required
Writer: John Turner Project: Advanced Data Guarding for the Smart Array 5300 Controller Reference Guide Comments: final draft
Part Number: 188270-xx1 File Name: c-ch2 Installation.doc Last Saved On: 12/11/00 12:04 PM
Figure 2-2. Aligning the module on the controller board
Installing the RAID ADG Enabler Module
To install the RAID ADG Enabler Module:
1. Perform the preliminary steps described earlier in this chapter.
2. Ensure that the Array Accelerator on your Smart Array 5300 controller
has at least 64 MB of read/write cache.
3. Hold the module at an angle and insert the rear end of the module into
the appropriate slot 1.
1
2
b
a
Figure 2-3. Installing the module