Advanced Data Guarding User Guide

Compaq Confidential – Need to Know Required
Writer: John Turner Project: Advanced Data Guarding for the Smart Array 5300 Controller Reference Guide Comments: final draft
Part Number: 188270-xx1 File Name: h-appD Additional POST Messages.doc Last Saved On: 12/11/00 12:07 PM
Appendix
D
Additional POST Error Messages
If a system fault is present when the computer is started up, Power-On Self-
Test messages will display. Many of these messages are self-explanatory and
suggest corrective actions. Messages unique to the use of RAID ADG are
listed in the following table.
Table D-1
POST Error Messages
Number Message Meaning and recommended action
1754 Slot z drive array – RAID ADG drive(s)
configured but ADG Enabler Module is
detached or defective. Please check for
detached ADG Enabler Module. Array
Accelerator is temporarily disabled.
An operational ADG Enabler Module must be
attached whenever RAID ADG volumes are
configured or the Array Accelerator will be
disabled. Replace the ADG Enabler Module.
1755 Slot z drive array – ADG Enabler Module
appears to be defective. Please replace
the ADG Enabler Module.
Replace the defective ADG Enabler Module, or
remove it if unneeded (i.e., if no RAID ADG
logical drives are configured).