Smart Array 5i Plus Controller and Battery Backed Write Cache Enabler User Guide

Configuring the System
6-2 Compaq Smart Array 5i Plus Controller and Battery Backed Write Cache Enabler User Guide
COMPAQ CONFIDENTIAL
Writer: Amy L. Laffitte File Name: g-ch6 configuring the system
Codename: Executor Part Number: 266328-001 Last Saved On: 4/18/02 2:39 PM
2. Press the F9 key when prompted during system startup.
The ROM-Based Setup Utility menu screen is displayed.
Figure 6-1: RBSU menu screen
3. Configure your system. (For detailed instructions, refer to the Compaq ROM-
Based Setup Utility User Guide.)
4. Set the boot controller by selecting Boot Controller Order on the RBSU menu
screen and following the on-screen prompts.
5. When you have finished using the utility, press the Esc key, and then press the
F10 key to confirm that you want to exit RBSU.