Smart Array 5300 Controller User Guide

Index
Index-6 Compaq Smart Array 5300 Controller User Guide
COMPAQ CONFIDENTIAL
Writer: John Turner File Name: x-index.doc
Codename: SilverHammer Part Number: 135606-004 Last Saved On: 5/23/02 9:57 AM
I
installing
adapter board 9-8
array accelerator 9-1
batteries 9-4
cache 9-1
controller hardware 3-1
controller, flowcharts for 2-1
CPQONLIN 7-26
device drivers 8-1
multiple array controllers H-1
interim data recovery
description of 1-9
limitation of D-11
internal cabling 3-4
internal connectors on board 1-2
J
jumpers, setting 3-4, H-2
L
LEDs
blinking 7-8, E-3
identifying drives by, in ACU 7-8
interpreting drive status by E-2
lit on idle system H-4
limitations on
ACU use 7-2
controller port use 3-6
CPQONLIN use 7-2
drive movement E-9
hard drive capacity 7-1
hard drive types supported E-1
number of controllers per system H-1
number of hard drives per system H-1
number of logical drives allowed per
array 7-2
ORCA use 7-2
spare drive capacity 7-18
stripe size 7-13
linear memory 5-6
load balancing, defined D-7
location of other guides xi
logical drive capacity extension
description of E-11
procedure for 7-23
logical drives
compared to array D-3
creation of, with ACU 7-19
creation of, with CPQONLIN 7-32
creation of, with ORCA 7-3
defined D-2
enlarging (extending) E-11
failure of E-2, E-4
identifying, using ACU 7-8
maximum number of, per array 7-4,
7-14
maximum size of 7-14
multiple, creating 7-14
partitioning of 7-25
recovery of, options for E-4
LVD (Low Voltage Differential)
compatibility of, with SE H-2
distinction of, from Ultra3 SCSI H-2
support for 1-8
M
manual configuration of array
with ACU 7-16
with CPQONLIN 7-28
manuals xi
maximum
boot size, enabling 7-14
data preservation time 1-6
logical drive size 7-14
stripe size 7-13
maximum number of
controllers per system H-1
hard drives for RAID 5 D-10
hard drives for RAID ADG D-10
hard drives per system H-1
logical drives per array 7-4, 7-14