HP Smart Array Controllers on HP ProLiant Servers User Guide

Upgrade and replacement procedures 65
6.
Open the ejector latches on each side of the DIMM slot. Normally, the cache module is ejected from the
DIMM slot. If the module is not ejected automatically, remove the cache module.
CAUTION: When connecting or disconnecting the capacitor pack cable, the connectors on the
cache module and cable are susceptible to damage. Avoid excessive force and use caution to
avoid damage to these connectors.
7. If the cache module is connected to a capacitor pack, carefully disconnect the capacitor pack cable
from the connector on the top of the cache module.
8. If the previous cache module was connected to a capacitor pack, carefully connect the capacitor pack
cable to the new cache module.
9. Install the new cache module in the DIMM slot.
10. Close the ejector latches on the DIMM slot.
11. If you removed the controller for access purposes, install the controller.
Replacing a P800 cache battery