HP Smart Array Controller technology, 4th edition

The ACU also contains a command line interface (ACU-CLI), offering a quicker way to deploy multiple

servers by automating creation of arrays and logical drives.

Option ROM Configuration for Arrays

ORCA is an alternative method of viewing, creating, and deleting multiple arrays and logical drives during

system power up. Although ORCA performs all array configuration tasks, it works best with simpler

configurations. We recommend the ACU for more advanced array configurations.

CPQONLIN

CPQONLIN is a configuration utility that runs online on Novell NetWare. It functions like the ACU in this

environment. Refer to the HP Smart Array controller documentation for more information about using

CPQONLIN.

HP Systems Insight Manager

HP Systems Insight Manager is a client/server tool for integrated server environment management. Based

on SNMP, it is capable of monitoring more than 1,200 system-wide parameters for performance and other

operational characteristics of Smart Array controller storage. The program displays:

 Configuration information

 Device driver versions

 Controller firmware versions

 Pre-Failure Warranty information

 Operating statistics

HP SIM lets you look at low-level performance characteristics of Smart Array controllers. It monitors three

basic Smart Array controller performance parameters:

 I/O commands per second

 Average command latency

 Local processor utilization

Analyzing these key parameters can help you fine-tune your configurations. HP SIM can chart performance

over time for each of these parameters. A background task monitoring these parameters notifies HP SIM if a

drive fails to meet certain factory-preset criteria. HP SIM alerts the administrator to the potential problem.

Array Diagnostics Utility

ADU is an in-depth diagnostic and reporting utility for all Smart Array controllers. The ADU quickly

identifies problems such as incorrect versions of firmware, improperly installed drives, inappropriate error

rates, and failed batteries on the array accelerator board.

The ADU displays a detailed analysis of the system configuration. If the cause is not apparent, the ADU can

generate a full report for administrators to fax or e-mail to HP customer service for phone support.