Manualshelf

Cache Battery for the HP Smart Array P700m Controller Installation Instructions

ManualsBrandsHP ManualsComputer AccessoriesHP Smart Array P700m/512 4-ports Ext PCIe x8 SAS Controller
12
Replacing the battery
CAUTION: Electrostatic discharge can damage electronic
components. Be sure you are properly grounded before
beginning this procedure.
1. Back up all data.
2. Close all applications, and then power down the server.
This procedure flushes all data from the cache.
3. Remove or open the server access panel.
4. Remove the battery case from the hard drive slot.
5. Invert the battery case.
6. Pull the right hand portion of the battery case away from the
battery pack and simultaneously rotate the battery out of the
opening.
7. Install the new battery pack as described in "Installing the
battery."
8. Close the server access panel.