HP 3Gb SAS BL-c Pass-Thru Module Installation Instructions

HP 3Gb SAS BL-c Pass-Thru

Module

Installation Instructions

Installing the pass-thru module

1. Press the latch button, and then pull the locking handle.

2. Insert the module into a double-wide slot in the rear of the

blade system enclosure.

3. Push the locking handle until the latch button clicks.

4. Connect one or more ports to the appropriate blade servers.

(The number next to each port indicates the blade server

appropriate for that port.)

The information contained herein is subject to change without notice. The only

warranties for HP products and services are set forth in the express warranty

statements accompanying such products and services. Nothing herein should

be construed as constituting an additional warranty. HP shall not be liable for

technical or editorial errors or omissions contained herein.

Part Number 456550-001

August 2007 (First Edition)

PAGE 1
HP 3Gb SAS BL-c Pass-Thru Module Installing the pass-thru module 1. Press the latch button, and then pull the locking handle. 2. Insert the module into a double-wide slot in the rear of the blade system enclosure. 3. Push the locking handle until the latch button clicks. 4. Connect one or more ports to the appropriate blade servers. (The number next to each port indicates the blade server appropriate for that port.) Installation Instructions © Copyright 2007 Hewlett-Packard Development Company, L.