HP Smart Array P700m Controller Installation Overview

9. Connect storage devices to the controller.

10. Reconnect peripheral devices and the AC power supply to the

server.

11. Power up peripheral devices.

12. Power up the server.

13. Update the controller firmware.

14. (Optional) Set this controller as the boot controller using

ORCA.

15. (Optional) Change the controller boot order using RBSU.

16. If the controller will not be the boot device, install the device

drivers.

17. If new versions of the Management Agents are available,

update the Management Agents.

18. (Optional) Create additional logical drives.

The server is now ready to use.

Additional information

If you cannot find the information that you need in this overview,

there are several other resources that you can use to get more

detailed information:

• The controller user guide on the Documentation CD

• The HP website (http://www.hp.com/products/smartarray

)

• Your nearest HP authorized reseller (for the locations and

telephone numbers of these resellers, refer to the HP website)

• HP technical support:

o In the United States and Canada, call 1-800-HP-INVENT

(1-800-474-6836).

o In other countries, refer to the HP website for technical

support information.

Legal notices

The information contained herein is subject to change without notice. The only

warranties for HP products and services are set forth in the express warranty

statements accompanying such products and services. Nothing herein should

be construed as constituting an additional warranty. HP shall not be liable for

technical or editorial errors or omissions contained herein.