HP A7143A RAID160 SA Controller Support Guide, February 2007

Installing the RAID160 SA Controller
Verifying the Installation
Chapter 4
47
Verifying the Installation
After the system reboots, verify that the installation was successful by following these steps:
Step 1. Issue the swlist command:
swlist
If the RAID160 SA controller is installed correctly, the generated output will look similar to this:
# swlist
# Initializing...
# Contacting target "hpfcs681"...
#
# Target: hpfcs681:/
#
#
# Bundle(s):
#
B3899BA B.11.11.06 HP C/ANSI C Developer’s Bundle for HP-UX 11.i
(S700)
B3901BA B.11.11.04 HP C/ANSI C Developer’s Bundle for HP-UX 11.i
(S800)
B7609BA A.04.00 Event Monitoring Service
BUNDLE11i B.11.11.0102.2 Required Patch Bundle for HP-UX 11i, February 2001
Base-VXVM B.03.20.1 Base VERITAS Volume Manager 3.2 for HP-UX
CDE-English B.11.11 English CDE Environment
FDDI-00 B.11.11.02 PCI FDDI;Supptd HW=A3739A/A3739B;SW=J3626AA
FibrChanl-00 B.11.11.09 PCI/HSC FibreChannel;Supptd
HW=A6684A,A6685A,A5158A,A6795A
GOLDAPPS11i B.11.11.0306.4 Gold Applications Patches for HP-UX 11i, June
2003
GOLDBASE11i B.11.11.0306.4 Gold Base Patches for HP-UX 11i, June 2003
GigEther-00 B.11.11.14 PCI/HSC GigEther;Supptd
HW=A4926A/A4929A/A4924A/A4925A;SW=J1642AA
GigEther-01 B.11.11.04 PCI GigEther;Supptd HW=A6794A/A6825A/A6847A
HPUX11i-OE B.11.11.0206 HP-UX 11i Operating Environment Component
HPUXBase64 B.11.11 HP-UX 64-bit Base OS
HPUXBaseAux B.11.11.0206 HP-UX Base OS Auxiliary