HP A7143A RAID160 SA Controller Support Guide, February 2007

Installing the RAID160 SA Controller
RAID160 SA Controller Firmware
Chapter 4
51
An example of the lengthy sautil <device_file> command output is provided in “The sautil Command” on
page 80 in the Troubleshooting chapter.
Issuing the sautil <device_file> -s command provides an abbreviated listing of information for the
RAID160 SA controller and all connected devices, including the firmware version currently in ROM.
# sautil /dev/ciss6 -s
******************************************************************************
**** ****
**** S A U T I L S u p p o r t U t i l i t y ****
**** ****
**** for the HP A7143A RAID160 SA SCSI Adapter ****
**** ****
**** version A.01.01 ****
**** ****
**** (c) Copyright 2003 Hewlett-Packard Development Company, L.P. ****
******************************************************************************
---- DRIVER INFORMATION ------------------------------------------------------
Driver State........................ READY
---- ADAPTER INFORMATION -----------------------------------------------------
Adapter............................. HP A7143A RAID160 SA SCSI Adapter
Hardware Path....................... 0/6/0/0
Serial Number....................... P2313ADDAOVCDK
Device File......................... /dev/ciss6
Hardware Revision................... ’A’
Firmware Revision (in ROM).......... 2.92
# of Logical Drives................. 1
# of Physical Disks Configured...... 4
# of Physical Disks Detected........ 4
---- ARRAY ACCELERATOR (CACHE) INFORMATION -----------------------------------