HP A7143A RAID160 SA Controller Support Guide, February 2007

Installing the RAID160 SA Controller
RAID160 SA Controller Firmware
Chapter 4
56
**** version A.01.01 ****
**** ****
**** (c) Copyright 2003 Hewlett-Packard Development Company, L.P. ****
******************************************************************************
---- DRIVER INFORMATION ------------------------------------------------------
Driver State........................ READY
---- ADAPTER INFORMATION -----------------------------------------------------
Adapter............................. HP A7143A RAID160 SA SCSI controller
Hardware Path....................... 0/6/2/0
Device File......................... /dev/ciss6
---- FIRMWARE DOWNLOAD -------------------------------------------------------
** You are downloading the firmware image "/opt/raidsa/bin/MAXWELL332.BIN"
** to the adapter "/dev/ciss6".
Retrieving firmware image file from disk................... [Done]
Validating the file’s signature and size................... [Done]
Retrieving the firmware revision string from ROM........... [Done]
Retrieving the firmware revision string from the file...... [Done]
Current Revision (in ROM)....... 2.92
New Revision (in file).......... 3.32
WARNING: All I/O to this controller will be temporarily halted
while the firmware is being updated.
Do you want to continue (y/n)?
Preparing for download (this could take up to 2 minutes).....[Done]