HP A7143A RAID160 SA Controller Support Guide, February 2007

Installing the RAID160 SA Controller
Physical Disk Firmware
Chapter 4
65
**** ****
**** version A.01.01 ****
**** ****
**** (c) Copyright 2003 Hewlett-Packard Development Company, L.P. ****
******************************************************************************
---- DRIVER INFORMATION ------------------------------------------------------
Driver State........................ READY
---- ADAPTER INFORMATION -----------------------------------------------------
Adapter............................. HP A7143A RAID160 SA SCSI controller
Hardware Path....................... 0/6/2/0
Device File......................... /dev/ciss6
---- FIRMWARE DOWNLOAD -------------------------------------------------------
** You are downloading the firmware image "HPB4d849.lod"
** to the physical disk "1:0" (channel:ID)
** connected to the controller "/dev/ciss6".
Verifying that the specified target disk is valid.......... [Done]
Retrieving firmware image file from disk................... [Done]
Retrieving the firmware revision string from ROM........... [Done]
Current Revision (in ROM)....... HPB3
WARNING: All I/O to this controller will be temporarily halted
while the firmware is being updated.
Do you want to continue (y/n)?
Preparing for download (this could take up to 2 minutes)... [Done]
Sending the new firmware to the disk....................... [Done]