HP A7143A RAID160 SA Controller Support Guide, February 2007

Troubleshooting
The sautil Command
Chapter 6
92
Logical drive specified: 0
WARNING: The status of logical drive 0 will be set to "OK". The
status of all physical disks that have been replaced on this
logical drive will also be set to "OK".
While this option preserves the RAID configuration (logical
drive configurations, adapter settings, etc.), data on the
failed logical drive may have already been compromised. If
more disks have failed than the RAID level can accommodate,
you will need to restore your data from backup media.
Do you want to continue (y/n)?
******************************************************************************
**** End of SAUTIL Output ****
******************************************************************************
sautil <device_file> run_startup_script
The run_startup_script option runs the RAID160 SA controller startup script to recreate the device files
(/dev/cissX).