HP A9890A Smart Array 6402 Controller Installation Guide

Smart Array 6402 Controller OpenVMS Installation
Smart Array 6402 OpenVMS Quick Installation
Chapter 4
35
Step 2. Install the Smart Array PCI-X RAID card (A9890A) in a full-length PCI slot. There may be a
specific slot required on your server, please see your server documentation for details.
Step 3. Remove the SCSI cable(s) connecting the internal disks to the built-in SCSI controller.
Step 4. Route the new SCSI cables(s) from the internal disks to the Smart Array cards.
Step 5. Replace access panels and covers
CAUTION Do not operate the server for long periods without the access panel installed. Operating the
server without the access panel results in improper airflow and improper cooling that can lead
to thermal damage.
WARNING To reduce the risk of personal injury or damage to the equipment, consult the safety
information and user documentation provided with your server before attempting
installation.
Many computers are capable of producing energy levels that are considered
hazardous. These computers are intended to be serviced by qualified personnel
trained to deal with those hazards. Do not remove enclosures or attempt to bypass
any interlocks that may be provided for the purpose of removing these hazardous
conditions.