HP Smart Array 6400 Series Controllers Support Guide, September 2007

7. Once the logical drives and arrays have been configured, exit the recovery shell by entering
reboot at the prompt. The system reboots and you return to the Boot Console Handler
(BCH) prompt.
8. At the BCH prompt, start Ignite-UX from the HP-UX 11i v1 Core OS Install and Recovery
Media. The Ignite-UX Welcome screen displays (see Step 1).
9. Select Install HP-UX.
10. Select the kind of installation (Guided or Advanced) you want to do.
The installation starts, and the Ignite-UX GUI appears.
11. On the Basic tab, select the configuration to use according to the HP-UX system you are
using.
12. On the Basic tab, for the root disk for the installation, select the Smart Array logical drive
you want to install the HP-UX operating system on.
13. Finish the installation as usual.
14. Once the installation is complete, you can boot from that Smart Array logical drive.
44 Installing Smart Array 6400 Series Controllers