HP Smart Array P700m Controller for Integrity Servers Installation Guide, Second Edition

IMPORTANT: Both saupdate.efi and the firmware image file must be located in the same

directory. If they are not, copy them both to the EFI partition. Run the saupdate.efi using the

fs0:\> saupdate command.

• If you are not using the Offline Diagnostic CD:

1. Download the Smart Array EFI update utility saupdate.efi and copy it to the EFI partition.

2. Download the firmware and copy it to the EFI partition.

3. Boot the system to the EFI Shell and change directories to the EFI partition.

• When you are ready to run saupdate, use saupdate UPDATE to update the firmware on

the controller.

The syntax of the saupdate UPDATE command is as follows:

saupdate UPDATE <seg:bus:dev:func> <smartarray_firmware_file>

For example, to update the controller at segment 0, bus 8, device 0, function 0 from the example

output above:

fs0:\> saupdate UPDATE 0:8:0:0 INCPTR.PAK

Replace INCPTR.PAK with the name of your firmware file.

For example:

fs0:\EFI\TOOLS> saupdate update 0:8:0:0 INCPTR.PAK

********************************************************************************

Smart Array Offline Firmware Update Utility

Version 2.09.03.01

********************************************************************************

Updating controller in Seg: 0, Bus: 8, Dev: 0, Func: 0 Current firmware version 6.60 Build 0

Percentage completed: 100%

Activating firmware now, this may take several minutes.

Resetting and reinitializing controller.

Retrieving firmware version, this may take several minutes.

Current controller firmware version is 6.60 Build 0

Verifying the firmware update

After updating the firmware, cycle the power on the system and on any external JBODS connected

to the system.

After performing the firmware update, use LIST to confirm that the correct firmware version is

installed; see “Verifying the controller firmware” (page 5).

HELP or ?

Use HELP or ? to display usage text, program version number, and build date:

Enter: saupdate HELP

saupdate ?

18 OpenVMS installation