HP Smart Array P700m Controller for Integrity Servers Installation Guide, Second Edition

4. Restore the server blade to its operating position in the server blade enclosure.
NOTE: By default, the server blade powers on after installation.
Installing the cache battery
IMPORTANT: The cache battery is required to enable Battery Backed Write Cache for RAID 5
or ADG configurations.
NOTE: For information on installing the battery on a BL860c, see your server documentation.
1. Plug the battery cable's plug into the cache battery:
a. Invert the battery (print side down) and with the battery cable's plug's label (contoured)
side up, line up the plug's edges with the thin slits on the sides of the battery.
b. Push the battery cable's plug, into the battery's connector, until it snaps into place.
22 Hardware installation