HP Smart Array P800 Controller for Integrity Servers Installation Guide, December 2007

2. Use saupdate list to confirm that the correct firmware version is installed. See “Verifying
the Controller Firmware” (page 11).
For example:
fs0:\EFI\TOOLS> saupdate list
********************************************************************************
Smart Array Offline Firmware Update Utility
Version 2.06.10.03
(C) Copyright 2006 Hewlett-Packard Development Company, L.P.
********************************************************************************
Seg Bus Dev Func Description Version
0 52 0 0 HP Smart Array P400 2.08
HELP or ?
Use HELP or ? to display usage text, program version number, and build date:
Enter: saupdate HELP
or
saupdate ?
Error Messages
The following error messages might appear when using saupdate:
• When keyword LIST or UPDATE is misspelled or extra parameters are specified:
Error: Syntax Error
Usage: saupdate LIST or saupdate UPDATE [ | all ]
• When the controller ID in the saupdate UPDATE command is not correct:
No matching controller found
• When a firmware file does not exist in the saupdate UPDATE directory:
INCPTR.BIN does not exist.
File INCPTR.BIN: Not Found
• When an invalid or corrupted firmware file is specified in the saupdate UPDATE command:
INCPTR.BIN does not exist.
File INCPTR.BIN: invalid or corrupted
Verifying and Updating Enclosure Firmware Offline
Follow the procedures in this section to verify and update the firmware in an external enclosure.
Verifying the Enclosure Firmware
Use saupdate from the EFI Shell to verify the firmware image on the enclosure.
To verify the enclosure firmware with saupdate, follow these steps:
14 HP-UX Installation