RAID-01 (ciss) B.11.31.0906 Mass Storage Driver Release Notes, Edition 2 (September 2009)

2 New and Changed Features in This Release
2.1 New Features
The following feature is new with this version of RAID-01:
• Support for HP StorageWorks MSA2300 Series enclosures.
RAID-01 version B.11.31.0906 adds support for HP StorageWorks MSA2312 and MSA2324sa
enclosures. The SAS Shared storage is supported with the Direct Connect Storage for HP
BladeSystem using the HP StorageWorks 3Gb SAS BL Switch and a Smart Array P700m
controller. HP recommends that RAID-01 version B.11.31.0906 is installed on HP BladeSystem
connected to a HP StorageWorks 2300.
NOTE: Booting to logical volumes on the StorageWorks MSA2312 or MSA2324sa enclosure
is not supported with version RAID-01 version B.11.31.0906. Boot support will be added in
a future release.
See the following documents for more information on installing and configuring this storage
solution:
— For information on HP direct connect storage solutions, see the Direct Connect SAS
Storage website at:
http://h18006.www1.hp.com/products/storageworks/sas_solution/index.html
— For information on supported servers and operating systems for HP Smart Array P700m
controllers, see the HP Smart Array RAID Controllers Support Matrix on the HP website
at:
http://docs.hp.com/en/netcom.html
— For information on installing, verifying, and configuring HP Smart Array P700m
controllers, see the HP Smart Array P700m Controller for Integrity Servers Installation Guide
on the HP website at:
http://docs.hp.com/en/netcom.html
— For more information on the 3Gb SAS BL Switch, see the documents on the HP Business
Support Center website at:
http://bizsupport.hp.com
Search for “3Gb SAS BL Switch”.
— For more information on installing and configuring HP StorageWorks 2300 series
enclosures, see the documents on the HP Business Support Center website at:
http://bizsupport.hp.com
Search for “MSA2300”.
IMPORTANT: The RAID-01 B.11.31.0906 bundle is only for use on HP Integrity servers with a
Smart Array P700m card controlling an HP StorageWorks MSA2300 series enclosure. Systems
running HP-UX 11i v3 with any other storage configuration should use RAID-01 version
B.11.31.0903.
4