RAID-01 (ciss) B.11.31.
© Copyright 2010 Hewlett-Packard Development Company, L.P. Legal Notices Hewlett-Packard makes no warranty of any kind with regard to this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be held liable for errors contained herein or direct, indirect, special, incidental or consequential damages in connection with the furnishing, performance, or use of this material. Confidential computer software.
This document provides updated information about the March 2010 release of the RAID-01 bundle for HP-UX 11i v3.
3 Problems Fixed in This Version Table 2 lists the problems fixed in this version of RAID-01. Table 2 HP-UX 11i v3 March 2010 Fixes — RAID-01 B.11.31.1003 SR Number Description QXCR1000863084 I/O hangs occur under heavy load. QXCR1000914639 MSI-X interrupts are not assigned with HBA locality taken into consideration. QXCR1000934272 The ciss driver does not support the GET_SCSI_DISK_BINDING ioctl. QXCR1000934287 The ciss driver causes a panic in rare circumstances on systems with very low memory.
Under “Maintenance and Support,” click the Patch Database link, then search for the patch number. For more information on how to manage and install patches, see the Patch Management User Guide for HP-UX 11.x Systems at: http://www.hp.com/go/hpux-core-docs NOTE: If you remove the dynamically loaded ciss driver while it is in use, or if you remove the statically loaded ciss driver at any time, you must perform a reboot. This is normal behavior under these conditions, and is not affected by patch PHCO_36356.
3. 4. 5. 6. Power on the system. Install HP-UX 11i v3, Application Release 0909. Install RAID-01 B.11.31.0909. Connect the MSA2300 Series enclosure. No special considerations apply when performing a clean installation of AR0909 on servers that are not configured with an MSA2300 Series enclosure to AR0909. You can download the RAID-01 B.11.31.0909 bundle from the HP website at: http://www.hp.com/go/softwaredepot Search for RAID-01. • SAS Storage Enclosure Status display issue in sautil command output.
Corrective Action: Reset the Smart Array controller using the sautil reset_ctlr command. When the controller is reset, ioscan correctly reports the status of the disks as NO_HW. • Controller fails when two connectors are used on the same channel. Each channel has two connectors (one internal and one external), but only one connector can be used per channel at any given time.
http://docs.hp.com/en/netcom.html Available documents include: • • • • HP Smart Array SAS Controllers for Integrity Servers Support Guide HP Smart Array 6400 Series Controller Support Guide HP A7143A RAID160 SA Controller Support Guide HP Smart Array Controller Support Matrix 7 Software Availability in Native Languages The RAID-01 product is available only in the English language.
