RAID-01 (ciss) B.11.31.1012 mass storage driver release notes

This document provides updated information about the December 2010 release of the RAID-01
bundle for HP-UX 11i v3.
Changes from Edition 1
“New features” (page 4) provides updated instructions on finding information about supported
tape devices.
1 RAID-01 overview
The RAID-01 bundle contains the ciss driver, which supports the following HP Smart Array
controllers running on HP-UX 11i v3 platforms:
Table 1 Supported controllers
TechnologyCard TypePart NumberDescription
SCSI U160PCIA7143ASmart Array 5304
SCSI U320PCI-X
A9890ASmart Array 6402
A9891ASmart Array 6404
SAS 3 GbPCIeAD348A
Smart Array P400
AD397A
N/A (see Note)Smart Array P410i
SAS 6 GbPCIeAM311ASmart Array P411
SAS 3 GbPCIe Mezzanine508226-B21Smart Array P700m
PCIeAD335ASmart Array P800
SAS 6 GbPCIeAM312ASmart Array P812
Note: Smart Array P410i is the embedded RAID controller in HP Integrity BL8X0c i2 servers.
NOTE: For detailed information about which cards and features are supported on specific server
models, see the HP Smart Array RAID Controllers Support Matrix at http://www.hp.com/go/
hpux-iocards-docs.
Click the link for your HP-UX version. Support Matrix documents are listed alphabetically in the
“General reference” section.
This release includes the following components:
Table 2 RAID-01 bundle components
VersionDescriptionComponent
B.11.31.1012HP-UX driverciss
A.01.24HP-UX Smart Array command line configuration utilitysaconfig
A.02.16HP-UX Smart Array command line support utilitysautil
A.01.06HP-UX Smart Array information collection scriptsainfo
1.1 Driver versions
Table 3 lists the minimum supported RAID-01 ciss driver version for each Smart Array host bus
adapter:
1 RAID-01 overview 3