RAID-01 (ciss) B.11.31.
© Copyright 2011 Hewlett-Packard Development Company, L.P. Legal Notices Hewlett-Packard makes no warranty of any kind with regard to this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be held liable for errors contained herein or direct, indirect, special, incidental or consequential damages in connection with the furnishing, performance, or use of this material. Confidential computer software.
This document provides information about the March 2011 release of the RAID-01 bundle for HP-UX 11i v3. 1 RAID-01 overview The RAID-01 bundle in HP-UX Application Release 1103 contains version B.11.31.
Table 3 Minimum supported RAID-01 (ciss) versions for HP-UX 11i v3, by adapter (continued) Adapter Minimum driver version Smart Array P411 B.11.31.1005 Smart Array P700m B.11.31.0903 Smart Array P800 B.11.31.0712 Smart Array P812 B.11.31.1005 2 New and changed features in this release 2.1 New features The following feature is new with this version of RAID-01: • Tape support on certain Smart Array SAS controllers. Tape devices are now supported on certain Smart Array SAS controllers.
Table 6 HP-UX 11i v3 May 2010 fixes — RAID-01 B.11.31.1005 (continued) SR Number Description QXCR1001007903 32bit DMA handles need to be converted to 64bit. QXCR1001018760 Firmware update of MDS600 fails, yet it displays new firmware. QXCR1001022493 HP-UX ciss driver has to operate in a single mode (either RAID or HBA). QXCR1001023834 The sautil and saconfig utilities are enhanced to reflect HBA mode, version info, etc. Table 7 HP-UX 11i v3 March 2010 Fixes — RAID-01 B.11.31.
Under “Maintenance and Support,” click the Patch Database link, then search for the patch number. For more information on how to manage and install patches, see the Patch Management User Guide for HP-UX 11.x Systems at http://www.hp.com/go/hpux-core-docs. NOTE: If you remove the dynamically loaded ciss driver while it is in use, or if you remove the statically loaded ciss driver at any time, you must perform a reboot. This is normal behavior under these conditions, and is not affected by patch PHCO_36356.
2. 3. 4. 5. 6. Disconnect the MSA2300 Series enclosure. Power on the system. Install HP-UX 11i v3, Application Release 0909. Install RAID-01 B.11.31.0909. Connect the MSA2300 Series enclosure. No special considerations apply when performing a clean installation of AR0909 on servers that are not configured with an MSA2300 Series enclosure to AR0909. You can download the RAID-01 B.11.31.0909 bundle from the HP website at http:// www.hp.com/go/softwaredepot. Search for RAID-01.
Corrective Action: Reconnect the cables or reinsert the disks, then reset the Smart Array controller using the sautil reset_ctlr command. After the controller is reset, ioscan correctly reports the status of the disks as CLAIMED. • Disconnected external storage enclosures are not properly detected by ioscan. If you disconnect all cables connecting a Smart Array controller to external storage enclosures, saconfig and sautil show the status of the logical drives as FAILED.
6 Related information The latest documentation for RAID-01 is available in English at http://www.hp.com/go/ smart-array-raid-docs. 7 Software availability in native languages The RAID-01 product is available only in the English language.
