RAID-01 (ciss) B.11.31.1103 Mass Storage Driver Release Notes

Table 3 Minimum supported RAID-01 (ciss) versions for HP-UX 11i v3, by adapter (continued)
Minimum driver versionAdapter
B.11.31.1005Smart Array P411
B.11.31.0903Smart Array P700m
B.11.31.0712Smart Array P800
B.11.31.1005Smart Array P812
2 New and changed features in this release
2.1 New features
The following feature is new with this version of RAID-01:
• Tape support on certain Smart Array SAS controllers.
Tape devices are now supported on certain Smart Array SAS controllers. For details on which
devices are supported on each controller, see the HP Smart Array RAID Controllers Support
Matrix at:
http://www.hp.com/go/smart-array-raid-docs.
2.2 Changed features
There are no changed features included in RAID-01 at the time of this publication.
3 Problems fixed in this version
Table 4 HP-UX 11i v3 December 2010 Fixes — RAID-01 B.11.31.1012
DescriptionSR number
Support for tape partial reads when different read/write block sizes are used.QXCR1001070560
The saconfig /dev/cissX –N command displays no output.QXCR1001073598
PHY error threshold message displays an incorrect connector number for MSA2000sa G2
enclosures.
QXCR1001047583
Online firmware update of D2600 and D2700 enclosures to version 0102 fails.QXCR1001057381
The saconfig command doesn't create logical drives of the size in specified with the -c
option.
QXCR1001063275
Problems fixed in recent versions
Table 5 HP-UX 11i v3 September 2010 fixes — RAID-01 B.11.31.1009
DescriptionSR Number
On HP Integrity BL8x0c i2 servers, sautil(1M) does not clearly identify internal discs in non-RAID
setting.
QXCR1001040695
Table 6 HP-UX 11i v3 May 2010 fixes — RAID-01 B.11.31.1005
DescriptionSR Number
The sautil and saconfig utilities are enhanced to support Smart Array Advanced Pack.QXCR1000964181
Disk firmware download fails on P410i.QXCR1001002955
HBA firmware revision is not updated in driver structures.QXCR1001007900
4