Smart Array RAID Controllers Support Matrix April 3, 2013
21
Supported on Windows server 2003 with SmartSetup 6.2 and Windows server 2008 with SmartSetup 6.2 or later.
20
Supported on HP-UX B.11.31.0903 or later.
19
Supported on HP-UX B.11.23.0806 or later.
18
Support for MSA60 and MSA70 with SA P600 requires card FW level of 2.02 or above.
29
Multi Initiator configuration supported with AM311A in HBA mode starting with fw version 5.78 and later.
9
SA6402, SA6404 not supported in the server expansion unit with HP-UX.
7
This note has been superseded.
6
Boot on Windows supported only with Service Pack 1 (SP1).
Legal notices
28
Supported with Windows Solution Release 7.0 or later.
27
Supported with Windows Solution Release 6.52 or later.
26
SATA disks currently not supported.
25
Supported on HP-UX B.11.31.1009 or later.
24
Boot support for HP-UX will be available with the release of HP-UX B 11.31.1003. Windows boot support available with SmartSetup 6.2 or later.
31
>2TB Physical LUN is supported with RAID-01 B.11.31.1203 or later. This requires fw version 5.06 or later.
30
>2TB Logical LUN is supported with RAID-01 B.11.31.1109 or later. This requires fw version 5.06 or later.
3
Not supported on Linux operating systems.
16
Online Addition (OLA) not supported on HP-UX.
15
Supported on HP-UX B.11.31.0712 or later.
13
Adapter cannot be installed in slot 4 because the external SCSI cable interferes with the rp3440 chassis.
12
Supported on HP-UX B.11.31.0709 or later.
11
HP recommends that HP-UX 11i v3 users update to the newest available system and adapter firmware.
10
SA P800 is PCI-Express, and only supported in combination PCI-X/PCI-E backplanes
© 2004-2012 Hewlett-Packard Company, L.P. The information contained herein is subject to change without notice.
Please send your feedback on this document to docsfeedback@hp.com.
Go to http://www.hp.com/go/integrity-iocards-docs for matrices for other I/O cards and additional I/O card documentation.
32
The maximum boot disk size supported with the LVM boot layout is enhanced from 2 TB to 16 TB with the release of HP-UX B.11.31.1303. This requires fw version 6.22 or later.
This
8
HP-UX:
5
Internal drives, and boot on "Internal" or "External" drives are supported for Windows.
23
Supported on Windows server 2003 with SmartSetup 6.2 and Windows server 2008 with SmartSetup 6.2 or later.
22
Data only support on HP-UX B11.31.0906. (Boot support to be available in HP-UX 11.31.0909).
17
Internal disks are not supported on HP-UX.
14
Supported on HP-UX B.11.23.0712 or later.
Smart Array RAID Controllers support matrix Page 8 of 8