SCSI Disk Drives User Manual

Cable Accessories C-1
ENGLISH
C
Cable Accessories
*All HP rack-ready devices connect to the rack enclosure through a blind-
mate, easy-plug connector. The connectors on the back of the rack enclosure
are all 68-pin. To connect a device in your rack enclosure with the host
system, you may need either a 50-pin or 68-pin cable depending on the type of
bus used by the host system. (Wide single-ended cables can be used with
narrow single-ended devices.) For device-to-device connection in the rack use
a C2981A (68p–68p) 0.5 meter cable.
Cables and Terminators
Connection
on System
Device
Type*
Cable Pins
Cable
Length
Part
Number
FWD 68p FWD 68–68 0.9 C2911A
FWD 68p FWD 68–68 2.5 C2924A
FWD 68p WD WD terminator - C2905A
WSE 68p WSE 68–68 0.5m C2978A
WSE 68p WSE 68–68 1.5m C2979A
WSE 68p WSE SE terminator - C2972A
Device to
Device in Rack
any 68–68 0.5m C2981A
NSE 50p WSE 50-68 1.0m C2961A
NSE 50p WSE 50-68 1.5m C2962A
NSE 50p WSE 50-68 2.0m C2906A
WSE = wide single-ended NSE = narrow single-ended
FWD = fast wide differential p = pin