HP StorageWorks 1510i Modular Smart Array installation and configuration roadmap (383069-003, July 2008)
Step 5: Record system information
Use the following spaces to record information about your MSA1510i
iSCSI storage network. This information should be obtained when
developing your installation and configuration plan. This information is
used during the initial setup and configuration, and is helpful for future
configuration changes and troubleshooting. This worksheet is sufficient
for relatively simple configurations. For complex configurations, create
your own worksheet or print the MSA1510i installation and user guide
andusethemoredetailedworksheetsinthebackoftheguide.
My configuration
_____ Singlepath _____ Multipath _____ Clustered-server
Server
Server model / server name
nl
OS version / service pack
nl
iSCSI initiator qualified name
nl
NIC 1 model / slot # / port #
nl
NIC 1 VLAN ID
nl
NIC 2 model / slot # / port #
nl
NIC 2 VLAN ID
_____________________________
nl
_____________________________
nl
__________
___________________
nl
_____________________________
nl
_____________________________
nl
__________
___________________
nl
_____________________________
Server
Server model / server name
nl
OS version / service pack
nl
iSCSI initiator qualified name
nl
NIC 1 model / slot # / port #
nl
NIC 1 VLAN ID
nl
NIC 2 model / slot # / port #
nl
NIC 2 VLAN ID
_____________________________
nl
_____________________________
nl
_____________________________
nl
_____________________________
nl
_____________________________
nl
_____________________________
nl
_____________________________
Ethernet network switch
Switch model
nl
Port VLAN IDs
_____________________________
nl
_____________________________
Ethernet network switch
Switch model
nl
Port VLAN IDs
_____________________________
nl
_____________________________
MSA1510i
For the controller in slot 1:
nl
MA0 IP address / Subnet mask
nl
MA0 VLAN ID
nl
SA0 IP address / Subnet mask
nl
SA0 VLAN ID
nl
SA1 IP address / Subnet mask
nl
SA1 VLAN ID
.
nl
_____________________________
nl
_____________________________
nl
_____________________________
nl
_____________________________
nl
_____________________________
nl
_____________________________
For the controller in slot 2:
nl
MB0 IP address / Subnet mask
nl
MB0 VLAN ID
nl
SB0 IP address / Subnet mask
nl
SB0 VLAN ID
nl
SB1 IP address / Subnet mask
nl
SA1 VLAN ID
.
nl
_____________________________
nl
_____________________________
nl
_____________________________
nl
_____________________________
nl
_____________________________
nl
_____________________________
nl
_____________________________
Step 6: Install the MSA1510i
The MSA1510i installation and user guide details the process of
installing the MSA1510i. Sections include:
• Preparing the site
• Preparing the network
• Installing MSA1510i hardware options
• Racking the MSA1510i and hard drive storage enclosures
• Installing hard drives
• Connecting cables
• Powering on the MSA1510i
• Verifying the operating status of the devices
1.
Server
2.
Ethernet network switch
3.
MSA1510i controller shelf
4.
MSA20 SATA hard drive storage enclosure
5.
Ethernet cables
6.
SCSI ca
ble
NOTE:
• For th
e2-PortEthernetiSCSII/Omodules,besuretodevelop
adeta
iled IP addressing scheme for the two ports to ensure
efficiency and security, and include plans for future expansion.
For details, see the iSCSI concepts and deployment guide.
• For the SCSI I/O modules, be sure to note the following
restriction: two MSA20 SATA enclosures or one MSA30 SCSI
enclosure may be connected, as indicated by the label on the
module. For details, see the installation and user guide.
> > > M SA 1510 i u s e r d o c u m e n t s a re p r ov i d e d o n t h e M SA 1510 i
Support CD, v2.0 or later, available on the MSA1510i support page:
h
ttp://www.hp.com/support.<<<
nl
nl
nl
Page 3