HP StorageWorks MSL Library Extender user guide (AQ746-96005, September 2009)

Figures
Library Extender installed with two MSL4048 Tape Libraries ......................................... 111
Help available from the RMI ..................................................................................... 152
Press the power buttons on both Libraries to power on the extended library .................... 163
Press the power button on the master Library to power off the extended library ............... 164
Identity > Library page ............................................................................................ 175
Example of the System Status pane from an extended library with an MSL8096 master
Library and MSL4048 lower Library .......................................................................... 19
6
Status > Library RMI page for an extended library with an MSL4048 master Library and
an MSL2024 lower Library ....................................................................................... 20
7
Configuration > System RMI page for an extended library with an MSL8096 master Library
and an MSL4048 lower Library ................................................................................ 22
8
Library Extender product contents .............................................................................. 289
Library Extender installed with two MSL4048 Tape Libraries ......................................... 2910
Library power button ............................................................................................... 3111
Two MSL4048 Tape Libraries installed in a rack in the rack rails supplied with the Libraries
in adjacent rack locations ........................................................................................ 31
12
Removing an MSL4048 from a rack .......................................................................... 3213
Installing the MSL2024 and MSL4048 rack rails ......................................................... 3314
Clip nut locations .................................................................................................... 3415
Installing an MSL4048 and tightening the captive screws ............................................. 3516
Tape drive thumbscrew locations ............................................................................... 3517
Removing a tape drive ............................................................................................. 3618
Removing drive bay covers to create space for the Extender ......................................... 3619
Installing covers on unused drive bays ....................................................................... 3720
Removing the USB device and Ethernet cable from the lower Library .............................. 3721
Trimming the pull-out tab .......................................................................................... 3822
Captive screw locations ........................................................................................... 3823
Aligning the Libraries with the alignment gauge .......................................................... 3924
Aligning the Extender with the upper drive bay ........................................................... 3925
Sliding the pull-out tab into the Library ....................................................................... 4026
Tightening the Extender thumbscrews ......................................................................... 4027
Extended library power buttons ................................................................................ 4128
Library Extender LEDs .............................................................................................. 4129
HP StorageWorks MSL Library Extender user guide 7