HP StorageWorks MSL4048 Tape Library Desktop Conversion (AG324-96005, June 2006)

HP StorageWorks
MSL4048 tape library desktop conversion
CAUTION! Parts can be damaged by electrostatic
discharge. Ensure you are properly grounded
when touching static sensitive components.
Choose a location
1
Locate the tape holding the lock at the top of the library.
Remove the tape, then remove the lock and store it as
shown.
Select a location for your tape library that has
adequate clearance for ventilation, has minimal dust
and debris exposure, has an appropriate power source,
and is near the host server. Select a flat, sturdy and
level surface. Do not place the tape library on its side
or stack items on top of the library.
Remove and store the
shipping lock
3
Clear a work surface to install the library cover. Unpack
the library and place it on the work surface with the top
facing up. Carefully remove the library cover from the
shipping container and place it on the work surface.
Unpack the tape library
and library cover
2
NOTE: This step is normally done when the
library is first unpacked. If this is not an initial
installation, the shipping lock may have already
been removed and stored.

Summary of content (2 pages)