HP B-series 16Gb FC Switches Hardware Reference Guide

6. Serial console port5. System power LED
8. FC ports (4–7)7. Switch ID pull-out tab
NOTE: The two LEDs on the serial console port are nonfunctional.
Nonport side of the switch
Figure 7 (page 18) shows the nonport side of the SN3000B 16Gb Switch.
Figure 7 Nonport side of the HP SN3000B 16Gb FC Switch
2. Power supply and fan assembly #11. Filler panel (Optional Power supply and fan assembly
can be added in this slot)
4. On/off switch3. Power supply and fan assembly LED
6. Thumbscrew5. Power plug receptacle (with plug retainer)
7. Handle
Software options
The following optional software kits and licenses are available.
• The Power Pack+ Software Bundle kit includes:
Adaptive Networking◦
◦ Fabric Watch
◦ ISL Trunking
◦ Extended Fabric
◦ Server Application Optimization
◦ Advanced Performance Monitor
◦ Fabric Vision Software
• HP B-series 8-24 Port SAN Switch Adaptive Networking LTU
• HP B-series 8-24 Port SAN Switch ISL Trunking LTU
• HP SN3000B 16Gb 24/12 FC Switch 12-port Upgrade LTU
NOTE: For the latest information on supported software components, see the product QuickSpecs
available from the HP website: http://www.hp.com/go/sn3000b/quickspecs.
ISL Trunking
ISL Trunking is optional software that enables creating trunking groups of ISLs between adjacent
switches. Up to eight FC ports on the HP SN3000B 16Gb FC Switch can be used as a trunking
group to achieve speeds of up to 128 Gb/s (256 Gb/s full duplex) for optimal bandwidth utilization
and load balancing.
18 HP 16Gb FC switches