HP B-series 16Gb FC Switches Hardware Reference Guide

Table 19 HP StoreFabric SN6500B 16Gb FC Switch environmental requirements
Acceptable range during nonoperationAcceptable range during operationCondition
-25º to 70ºC (-13º to 158ºF)0º to 40ºC (32º to 104ºF)Ambient
temperature
10% to 90% RH noncondensing, at 70ºC (158ºF)10% to 85% RH noncondensing, at 40ºC (104ºF)Humidity
0 to 12 km (39,370 ft) above sea level0 to 3 km (9,842 ft) above sea levelAltitude
33 G, 11 ms, half-sine wave, 3/e.g. Axis20 G, 6 ms, half-sine waveShock
2.0 G sine, 1.1 gms random, 5–500 Hz0.5 G sine, 0.4 gms random, 5–500 HzVibration
N/AMaximum: 176.7 cubic m/h (104 cubic ft/m)Airflow
Nominal: 52.7 cubic m/h (31 cubic f/m)
N/A1,378.5 BTU/hr (no optics configuration)Heat dissipation
1,706.1 BTU/hr (fully populated port
configuration)
Table 20 HP SN6000B and SN3000B 16Gb FC switches environmental requirements
Acceptable range during nonoperationAcceptable range during operationCondition
-25º to 70ºC (-13º to 158ºF)0º to 40ºC (32º to 104ºF)Ambient
temperature
10% to 90% RH noncondensing, at 70ºC (158ºF)10% to 85% RH noncondensing, at 40ºC (104ºF)Humidity
0 to 12 km (39,370 ft) above sea level0 to 3 km (9,842 ft) above sea levelAltitude
33 G, 11 ms, half-sine wave, 3/e.g. Axis20 G, 6 ms, half-sine waveShock
2.0 G sine, 1.1 gms random, 5–500 Hz0.5 G sine, 0.4 gms random, 5–500 HzVibration
N/AMaximum: 71.36 cubic m/h (42 cubic ft/m)Airflow
Nominal: 59.47 cubic m/h (35 cubic f/m)
N/A338 BTU/hr (32-port configuration)Heat dissipation
375 BTU/hr (48-port configuration)
General specifications
Table 21 HP StoreFabric SN6500B 16Gb FC Switch general specifications
DescriptionSpecification
E_Port, F_Port, M_Port, and D_Port; EX_Port with licenseConfigurable port types
Nonblocking shared-memory switchSystem architecture
PowerPC family CPU at 1.20 GHzSystem processor
FC-PHANSI FC protocol
FC Class 2 and Class 3Modes of operation
Complies with FC-SW-3 Rev. 6.6Fabric initialization
Complies with FC-IP 2.3 of FCA profileFC-IP
1,536 Gb/s end-to-end full duplexAggregate switch I/O bandwidth
700 nsLocal port latency
2,100 ns (2.1 microseconds) with no Forward Error CorrectionSwitch latency
General specifications 67