HP B-series 16Gb FC Switches Hardware Reference Guide
• One 2 GB compact flash card
• Up to 96 16 Gb/s FC ports
• One USB 2.0 port that provides storage for firmware updates, output of the supportSave
command, and storage for configuration uploads and downloads
• Two hot-swappable, 80+ Platinum-certified, redundant power supplies
• Three hot-swappable fan FRUs
• One LED (green/amber) per FC port to indicate status
• One LED (green) for system power
• One LED (green/amber) for system status
• Two LEDs per power supply: one green LED for AC line-in status, and one green/amber LED
for DC power-out
• One LED (green/amber) per fan
• Two Ethernet LEDs (integrated with RJ45) for speed and activity status
• SEEPROM for switch identification
• Voltage and temperature monitoring
• RTC with battery
• Fan monitoring, including flow direction
Port side of the switch
Figure 1 (page 8) shows the port side of the HP SN6500B StoreFabric 16Gb FC Switch.
Figure 1 Port side of the HP StoreFabric SN6500B 16Gb FC Switch
2. System status LED1. System power LED
4. FC ports 0–73. USB port
6. FC ports 48–955. FC ports 8–47
8. Management Ethernet port with LED7. Switch ID pull-out tab
9. Serial console port
Nonport side of the switch
Figure 2 (page 9) shows the nonport side of the HP StoreFabric SN6500B 16Gb FC Switch,
which contains the power supplies (including the AC power receptacle) and fans.
8 HP 16Gb FC switches