Brocade Fabric OS v7.2.1a Release Notes v1.0

Closed with Code Change in Fabric OS v7.2.1
Fabric OS v7.2.1a Release Notes v1.0 Page 47 of 55
Defect ID:
DEFECT000435100
Technical Severity:
Medium
Summary:
SNMPCONFIG is inconsistent on ISCSI settings
Symptom:
Disable ISCSI-mibcapability in FOSv6.3 and then upgraded to FOSv6.4, when the new firmware
comes up, ISCSI- MIB is in disabled state and ISCSI-TRAPS are in enabled state.
Risk of Fix:
High
Probability:
Medium
Feature:
FOS Software
Function:
SNMP
Reported In Release:
FOS6.3.0
Service Request ID:
1124455
Defect ID:
DEFECT000448581
Technical Severity:
Medium
Summary:
Port Rename, F-Port BB Credit & NPIV Max Login dialogs still persist even after the connection is
timed out and allows user to configure the values.
Symptom:
User is erroneously allowed to configure the values even after the connection times out.
Risk of Fix:
High
Probability:
Medium
Feature:
WebMgmt
Function:
Ports Admin
Reported In Release:
FOS7.2.0
Defect ID:
DEFECT000452801
Technical Severity:
Medium
Summary:
Switch unable to process commands
Symptom:
The Switch becomes unmanageable and will not accept FOS commands, including 'Reboot'.
The only way to recover is to power cycle the switch.
Workaround:
Nonw
Risk of Fix:
Low
Probability:
Low
Feature:
FOS Software
Function:
Management Embedded
Reported In Release:
FOS7.1.0
Defect ID:
DEFECT000453711
Technical Severity:
Medium
Summary:
Certificate key is not deleted when the certificate is deleted from Non-Default switch using seccertutil
command.
Symptom:
Standby CP/switch may continuously reboot with error message such as "SSLCertificateFile: file
‘/etc/fabos/certs/sw0/xxx.crt’ does not exist or is empty on console".
Workaround:
Remove the truncated 0 size SSL certificate file and reboot
Risk of Fix:
Low
Probability:
Medium
Feature:
FOS Software
Function:
High Availability
Reported In Release:
FOS7.1.0
Service Request ID:
1090957
Defect ID:
DEFECT000460453
Technical Severity:
Medium
Summary:
Error messages are displayed on embedded platform console during boot up and do not affect any
functionality.
Symptom:
"Can not find platform: 117" and "client: connect: Connection refused" messages occurred during
boot up
Risk of Fix:
High
Probability:
High
Feature:
Embedded Platform Services
Function:
FOS Kernel Driver
Reported In Release:
FOS7.2.0
Defect ID:
DEFECT000461267
Technical Severity:
High
Summary:
Host logs in as G-port on access gateway when n-port connection is pulled
Symptom:
Host failed to login to a Access Gateway switch. FLOGIs are not replies resulting in Gport.
Workaround:
Reboot Server, AG or some manual recovery method.
Risk of Fix:
Low
Probability:
High
Feature:
Access Gateway Services
Function:
Other
Reported In Release:
FOS7.1.0