Brocade Fabric OS v7.2.1a Release Notes v1.0

Fabric OS v7.2.1a Release Notes v1.0 Page 7 of 55
With FOS v7.2, the Adaptive Networking license has become part of the base FOS firmware, and
features under this license no longer require the license to be installed. Customers that wish to have
these capabilities without purchasing the license are required to upgrade to FOS v7.2 or later.
Brocade 6520 does not require the Adaptive Networking with QoS license to enable the capabilities
associated with this license. These capabilities are included by default on the Brocade 6520.
Server Application Optimization — When deployed with Brocade Server Adapters, this license optimizes overall
application performance for physical servers and virtual machines by extending virtual channels to the server
infrastructure. Application specific traffic flows can be configured, prioritized, and optimized throughout the
entire data center infrastructure. This license is not supported on the Brocade 8000.
Note :
With FOS v7.2, Server Application Optimization license has become part of the base FOS firmware,
and features under this license no longer require the license to be installed. Customers that wish to
have these capabilities without purchasing the license are required to upgrade to FOS v7.2 or later.
Brocade 6520 does not require the SAO license to enable the capabilities associated with this license.
These capabilities are included by default on the Brocade 6520.
Integrated Routing— This license allows any port in a DCX 8510-8, DCX 8510-4, Brocade 6510, Brocade 6520,
DCX-4S, DCX, 5300, 5100, 7800, or Brocade Encryption Switch to be configured as an Ex_port or VEx_port (on
some platforms) supporting Fibre Channel Routing. This eliminates the need to add an FR4-18i blade or use
the 7500 for FCR purposes, and also provides double or quadruple the bandwidth for each FCR connection
(when connected to another 8Gb or 16Gb-capable port). .
Encryption Performance Upgrade — This license provides additional encryption processing power. For the
Brocade Encryption Switch or a DCX/DCX-4S/DCX 8510-8/DCX 8510-4, the Encryption Performance License
can be installed to enable full encryption processing power on the BES or on all FS8-18 blades installed in a
DCX/DCX-4S/DCX 8510-8/DCX 8510-4 chassis.
DataFort Compatibility — This license is required on the Brocade Encryption Switch or DCX/DCX-4S/DCX 8510-
8/DCX 8510-4 with FS8-18 blade(s) to read and decrypt NetApp DataFort-encrypted disk and tape LUNs.
DataFort Compatibility License is also required on the Brocade Encryption Switch or DCX/DCX-4S/DCX 8510-
8/DCX 8510-4 Backbone with FS8-18 Encryption Blade(s) installed to write and encrypt the disk and tape
LUNs in NetApp DataFort Mode (Metadata and Encryption Algorithm) so that DataFort can read and decrypt
these LUNs. DataFort Mode tape encryption and compression is supported beginning with the FOS v6.2.0
release on DCX platforms. Availability of the DataFort Compatibility license is limited; contact your vendor for
details.
Advanced Extension – This license enables two advanced extension features: FCIP Trunking and Adaptive Rate
Limiting. The FCIP Trunking feature allows multiple IP source and destination address pairs (defined as FCIP
Circuits) via multiple 1GbE or 10GbE interfaces to provide a high bandwidth FCIP tunnel and failover resiliency.
In addition, each FCIP circuit supports four QoS classes (Class-F, High, Medium and Low Priority), each as a
TCP connection. The Adaptive Rate Limiting feature provides a minimum bandwidth guarantee for each tunnel
with full utilization of the available network bandwidth without impacting throughput performance under high
traffic load. This license is available on the 7800 and the DCX/DCX-4S/DCX 8510-8/DCX 8510-4 for the FX8-
24 on an individual slot basis.
10GbE FCIP/10G Fibre Channel – This license enables the two 10GbE ports on the FX8-24 and/or the 10G FC
capability on FC16-xx blade ports supported on DCX 8510 platforms. On the Brocade 6510, Brocade 6520
this license enables 10G FC ports.
On FX8-24:
With this license installed and assigned to a slot with an FX8-24 blade, two additional operating
modes (in addition to 10 1GbE ports mode) can be selected: