Brocade Fabric OS v7.0.2e Release Notes v1.0

Fabric OS v7.0.2e Release Notes v1.0 Page 13 of 53

• Brocade 7800 — On the pull-out tab on the front left side of the chassis underneath the serial

console and Ethernet connection and on the bottom of the switch in a well on the left side

underneath (looking from front)

• Brocade 8000 — On the switch ID pullout tab located inside the chassis on the port side on the

left and also on the bottom of the chassis

• Brocade DCX, DCX 8510-8 — Bottom right of the port side

• Brocade DCX-4S, DCX 8510-4 — Back, upper left under the power supply

World Wide Name (WWN)

When the Virtual Fabric feature is enabled on a switch, each logical switch has a unique

switch WWN. Use the

wwn

command to display the switch WWN.

If you cannot use the

wwn

command because the switch is inoperable, you can get the

primary WWN from the same place as the serial number, except for the Brocade DCX/DCX-4S

and DCX 8510-8/DCX 8510-4. For the Brocade DCX/DCX-4S and DCX 8510-8/DCX 8510-4

access the numbers on the WWN cards by removing the Brocade logo plate at the top of the

non-port side. The WWN is printed on the LED side of both cards.

License Identifier (License ID)

There is only one License Identifier associated with a physical switch or director/backbone

chassis. This License Identifier is required as part of the ordering process for new FOS

licenses.

Use the

licenseId

command to display the License Identifier.